Description
The TOUCH TCH-14102 10.FZ02 Face Frame Clip-on Mounting Plate is the mounting plate that positions a TOUCH concealed hinge on the cabinet. Plate height — not the hinge arm — sets how far the door sits in or out, so check it against your door thickness and target overlay before ordering. The features, specifications and compatible TOUCH hinges are set out below.
Face Frame Clip-on Mounting Plate Features & Specifications — TCH-14102 10.FZ02
Face Frame Cabinet Mounting Plate
Designed for face frame construction, where the plate fixes to the front frame rather than the cabinet side. It gives the hinge arm the correct reference point on the frame so overlay and door alignment are set accurately.
Clip-On Hinge Plate Connection
The hinge arm clips onto the plate and releases with a fingertip lever, giving tool-free door fitting and removal.
Height Adjustment for Door Alignment
Slotted fixing holes on the plate allow the door to be raised or lowered after hanging, completing the alignment adjustment provided by the hinge arm.
Durable Hinge Plate Construction
Hardware-grade construction for long service under repeated door removal and adjustment in residential and commercial cabinetry.
Where to Use a Face Frame Clip-on Mounting Plate
- Kitchen cabinets and pantry units
- Bathroom vanities
- Wardrobes and built-in furniture
- Office furniture
- Custom cabinetry
Compatible Products — TCH-14102 10.FZ02
Use with TOUCH TCH-14102-series clip-on hinges. Plate height code 10.FZ02 determines the door overlay or inset reveal — check the plate height against your door thickness and required overlay before ordering, and refer to the hinge product page for the recommended plate.
Match three things: the cabinet construction (face frame cabinet), the hinge arm connection type (clip-on), and the plate height that gives your target overlay. A plate that is too tall reduces overlay; one that is too short increases it. When in doubt, order the plate listed on the hinge page.
Why Choose the TOUCH TCH-14102 10.FZ02 Face Frame Clip-on Mounting Plate
The correct face frame cabinet plate for TOUCH TCH-14102 hinges, with height adjustment and tool-free clip-on mounting — the part that turns a good hinge into a correctly aligned door.
