Description
The TOUCH TCH-11306 10.F02 Face Frame Latch Mounting Plate is the mounting plate that fixes to the face frame cabinet and receives the arm of a compatible TOUCH TCH-11306-series hinge. The plate — not the hinge — sets the final door position, so choosing the correct plate is as important as choosing the hinge itself.
Face Frame Latch Mounting Plate Features & Specifications — TCH-11306 10.F02
Face Frame Cabinet Mounting Plate
Designed for face frame construction, where the plate fixes to the front frame rather than the cabinet side. It gives the hinge arm the correct reference point on the frame so overlay and door alignment are set accurately.
Latch-On Hinge Plate Connection
The hinge arm latches onto the plate and releases without removing screws, so doors can be hung, taken off for finishing or cleaning, and re-hung without re-adjustment.
Height Adjustment for Door Alignmen
Slotted fixing holes on the plate allow the door to be raised or lowered after hanging, completing the alignment adjustment provided by the hinge arm.
Durable Hinge Plate Construction
Hardware-grade construction for long service under repeated door removal and adjustment in residential and commercial cabinetry.
Where to Use a Face Frame Latch Mounting Plate
- Kitchen cabinets and pantry units
- Bathroom vanities
- Wardrobes and built-in furniture
- Office furniture
- Custom cabinetry
Compatible Products — TCH-11306 10.F02
Use with TOUCH TCH-11306-series latch hinges. Plate height code 10.F02 determines the door overlay or inset reveal — check the plate height against your door thickness and required overlay before ordering, and refer to the hinge product page for the recommended plate.
Match three things: the cabinet construction (face frame cabinet), the hinge arm connection type (latch), and the plate height that gives your target overlay. A plate that is too tall reduces overlay; one that is too short increases it. When in doubt, order the plate listed on the hinge page.
Why Choose the TOUCH TCH-11306 10.F02 Face Frame Latch Mounting Plate
The correct face frame cabinet plate for TOUCH TCH-11306 hinges, with height adjustment and tool-free latch mounting — the part that turns a good hinge into a correctly aligned door.
