Description
The TOUCH TCH-11502 37.D02 Frameless Clip-on 3D Mounting Plate is the mounting plate that fixes to the frameless cabinet and receives the arm of a compatible TOUCH TCH-11502-series hinge. The plate — not the hinge — sets the final door position, so choosing the correct plate is as important as choosing the hinge itself.
Frameless Clip-on 3D Mounting Plate Features & Specifications — TCH-11502 37.D02
Frameless Cabinet Mounting Plate
Designed for frameless (European) construction, where the plate fixes directly to the inside of the cabinet side panel. It positions the hinge arm at the correct distance from the front edge so the door overlay or inset reveal comes out right.
Clip-On Hinge Plate Connection
The hinge arm clips onto the plate and releases with a fingertip lever, giving tool-free door fitting and removal.
3D Adjustment on the Mounting Plate
The plate carries the height adjustment that completes three-dimensional door alignment — side and depth on the hinge arm, height on the plate — so doors can be trued in all three directions after hanging.
Durable Hinge Plate Construction
Hardware-grade construction for long service under repeated door removal and adjustment in residential and commercial cabinetry.
Where to Use a Frameless Clip-on 3D Mounting Plate
- Kitchen cabinets and pantry units
- Bathroom vanities
- Wardrobes and built-in furniture
- Office furniture
- Custom cabinetry
Compatible Products — TCH-11502 37.D02
Use with TOUCH TCH-11502-series clip-on hinges. Plate height code 37.D02 determines the door overlay or inset reveal — check the plate height against your door thickness and required overlay before ordering, and refer to the hinge product page for the recommended plate.
Match three things: the cabinet construction (frameless cabinet), the hinge arm connection type (clip-on), and the plate height that gives your target overlay. A plate that is too tall reduces overlay; one that is too short increases it. When in doubt, order the plate listed on the hinge page.
Why Choose the TOUCH TCH-11502 37.D02 Frameless Clip-on 3D Mounting Plate
The correct frameless cabinet plate for TOUCH TCH-11502 hinges, with 3D adjustment and tool-free clip-on mounting — the part that turns a good hinge into a correctly aligned door.
