Description
The TOUCH TCH-11206 37.B02 Frameless Latch Mounting Plate is the mounting plate that fixes to the frameless cabinet and receives the arm of a compatible TOUCH TCH-11206-series hinge. The plate — not the hinge — sets the final door position, so choosing the correct plate is as important as choosing the hinge itself.
Frameless Latch Mounting Plate Features & Specifications — TCH-11206 37.B02
Frameless Cabinet Mounting Plate
Designed for frameless (European) construction, where the plate fixes directly to the inside of the cabinet side panel. It positions the hinge arm at the correct distance from the front edge so the door overlay or inset reveal comes out right.
Latch-On Hinge Plate Connection
The hinge arm latches onto the plate and releases without removing screws, so doors can be hung, taken off for finishing or cleaning, and re-hung without re-adjustment.
Height Adjustment for Door Alignmen
Slotted fixing holes on the plate allow the door to be raised or lowered after hanging, completing the alignment adjustment provided by the hinge arm.
Durable Hinge Plate Construction
Hardware-grade construction for long service under repeated door removal and adjustment in residential and commercial cabinetry.
Where to Use a Frameless Latch Mounting Plate
- Kitchen cabinets and pantry units
- Bathroom vanities
- Wardrobes and built-in furniture
- Office furniture
- Custom cabinetry
Compatible Products — TCH-11206 37.B02
Use with TOUCH TCH-11206-series latch hinges. Plate height code 37.B02 determines the door overlay or inset reveal — check the plate height against your door thickness and required overlay before ordering, and refer to the hinge product page for the recommended plate.
Match three things: the cabinet construction (frameless cabinet), the hinge arm connection type (latch), and the plate height that gives your target overlay. A plate that is too tall reduces overlay; one that is too short increases it. When in doubt, order the plate listed on the hinge page.
Why Choose the TOUCH TCH-11206 37.B02 Frameless Latch Mounting Plate
The correct frameless cabinet plate for TOUCH TCH-11206 hinges, with height adjustment and tool-free latch mounting — the part that turns a good hinge into a correctly aligned door.
